AEM Short Ram Induction Systems

K&N Φίλτρα Αέρα - K&N Performance Air Filters

Home > AEM, Greece - AEM Filters, Intakes - AEM Electronics, Fuelling > AEM Short Ram Induction Systems >

Saturday 19-May-2012

Street & Circuit, Ελλάδα Παραγγείλετε Online: 24 Ώρες - Γραμμή Παραγγελιών: Δευτ-Παρ. 9πμ–3μμ - Σαβ: Μόνο Παραλαβή Προϊόντων	Γραμμή Παραγγελιών/Order Line: (0030) 211 770 8434, 2310 854 739	Street & Circuit, Greece Order Online: 24Hours - Order Line: Mon-Fri 9am-3pm - Sat: Part Collections Only
	***Εκτός Ωραρίου/Οι Γραμμές Μας Είναι Κατειλημμένες? θα Σας Τηλεφωνήσουμε Εμείς. Κάντε Κλικ Εδώ!***
Translate: Τρόποι Παραγγελίας/How to Order - Επικοινωνία/Contact Us

Ανταλλακτικά ανα Τύπο

Αμορτισέρ
-Εργοστασιακά
-Ρυθμιζόμενα
-Sport

Ανάφλεξη
-Custom
-Μπουζοκαλώδια
-Μπουζί Ιριδίου

Αναρτήσεις
-Ρυθμιζόμενες
-Coil Over
-Sport

Βολάν
-Αλουμινίου

Δισκόπλακες
-Brembo
-EBC
-Tarox
-Valeo

Εκκεντροφόροι
-Race
-Fast Road
-Ρυθμιζόμενα Γρανάζια
-Turbo
-Valvetrain

Engine Cooling
-CRY02
-Ταινία Εξάτμισης
-Heat Shields
-Hose/Wire Shields
-Πρόσθετο Αντιψυκτικού
-Turbo Insulation

Εξατμίσεις
-Αγωνιστικοί
-Καταλύτες
-Cat Back
-Decat pipe
-Downpipe
-Ελεύθεροι Καταλύτες
-Turbo Back
-Χταπόδια

Ελατήρια
-Αγωνιστικά
-Χαμηλώματος

Ζάντες Αλουμινίου
-Drag
-NEEZ
-Rota
-Tenzo-R

Ηλεκτρικά
-Boost Controllers
-Εγκέφαλοι
-Παράλληλοι
-Turbo Timers
-Wideband

Intercoolers
-Front Mount
-Universal
-Kit

Ψυγεία
-Αλουμινίου
-Εργοστασιακά

Κολάρα Σιλικόνης
-Γωνίες
-Ίσια Κολάρα
-Κιτ Κολάρων
-Κολάρα Εισαγωγής
-Κολάρα Turbo
-Κολάρα Υποπίεσης
-Κολάρα Νερού
-Σφυκτήρες

Μετάδοση
-Carbon Κεντρικοί Άξονες
-Ημιαξόνια
-Κιτ Γραναζόματος
-Μπλοκέ Διαφορικά
-Short Shift

Μπάρες Θόλων
-Εμπρός
-Πίσω

Όργανα Ελέγχου
-Βολτόμετρα
-Θερμοκρασία Λαδιού
-Θερμοκρασία Νερού
-Μπαρόμετρα
-Πίεση Λαδιού
-Πυρόμετρα
-Στροφόμετρα
-Υποπίεση

Συμπλέκτες
-Δίδισκοι
-Εργοστασιακοί
-Ενισχυμένοι

Συστήματα Καυσίμου
-Αντλίες
-Μπεκ
-Ρυθμιστές Πίεσης Βενζίνης
-Σωλήνες
-Σφυκτήρες

Σινεμπλόκ
-Αντιστρεπτικής
-Διαφορικού
-Μηχανής
-Σασμάν
-Ψαλιδιών

Σκάστρες
-Ανοιχτού Τύπου
-Κλειστού Τύπου

Φίλτρα Αέρα
-Κιτ Εισαγωγής
-Συστήματα Εισαγωγής
-Φίλτρα Πάνελ
-Φίλτρα Universal

Φρένα - Γενικά
-Δισκόπλακες
-Σωληνάκια
-Τακάκια
-Υγρά Φρένων

Κιτ Φρένων
-Εξαπίστονα
-OEM Δαγκάνες
-Τετραπίστονα

Δίσκοι Φρένων
-Δίσκοι OEM
-Τρυπητοί
-Χαρακτοί

Τακάκια
-Αγωνιστικά
-Δρόμου
-Ενδιάμεσα

Ανταλλακτικά - Γενικά
-Air Condition
-Αμορτισέρ
-Δυναμό
-Διακόπτες
-Ιμάντες Χρονισμού
-Ιντερκούλερ
-Μπουζί
-Μίζες
-Μηχανισμοί Παραθύρων
-Υαλοκαθαριστήρες
-Φανάρια
-Φίλτρα Βενζίνης
-Φίλτρα Καμπίνας
-Φίλτρα Λαδιού
-Ψυγεία Καλοριφέρ
-Ψυγεία Νερου

ExDisplay Parts

Ανταλλακτικά ανα Τύπο

TO OLD SITE

Αμορτισέρ
-Εργοστασιακά
-Ρυθμιζόμενα
-Sport

Ανάφλεξη
-Custom
-Μπουζοκαλώδια
-Μπουζί Ιριδίου

Αναρτήσεις
-Ρυθμιζόμενες
-Coil Over
-Sport

Βολάν
-Αλουμινίου

Δισκόπλακες
-Brembo
-EBC
-Tarox
-Valeo

Εκκεντροφόροι
-Race
-Fast Road
-Ρυθμιζόμενα Γρανάζια
-Turbo
-Valvetrain

Engine Cooling
-CRY02
-Ταινία Εξάτμισης
-Heat Shields
-Hose/Wire Shields
-Πρόσθετο Αντιψυκτικού
-Turbo Insulation

Εξατμίσεις
-Αγωνιστικοί
-Καταλύτες
-Cat Back
-Decat pipe
-Downpipe
-Ελεύθεροι Καταλύτες
-Turbo Back
-Χταπόδια

Ελατήρια
-Αγωνιστικά
-Χαμηλώματος

Ζάντες Αλουμινίου
-Drag
-NEEZ
-Rota
-Tenzo-R

Ηλεκτρικά
-Boost Controllers
-Εγκέφαλοι
-Παράλληλοι
-Turbo Timers
-Wideband

Intercoolers
-Front Mount
-Universal
-Kit

Ψυγεία
-Αλουμινίου
-Εργοστασιακά

Μετάδοση
-Carbon Κεντρικοί Άξονες
-Ημιαξόνια
-Κιτ Γραναζόματος
-Μπλοκέ Διαφορικά
-Short Shift

Μπάρες Θόλων
-Εμπρός
-Πίσω

Συμπλέκτες
-Δίδισκοι
-Εργοστασιακοί
-Ενισχυμένοι

Συστήματα Καυσίμου
-Αντλίες
-Μπεκ
-Ρυθμιστές Πίεσης Βενζίνης
-Σωλήνες
-Σφυκτήρες

Σινεμπλόκ
-Αντιστρεπτικής
-Διαφορικού
-Μηχανής
-Σασμάν
-Ψαλιδιών

Σκάστρες
-Ανοιχτού Τύπου
-Κλειστού Τύπου

Φίλτρα Αέρα
-Κιτ Εισαγωγής
-Συστήματα Εισαγωγής
-Φίλτρα Πάνελ
-Φίλτρα Universal

Φρένα - Γενικά
-Δισκόπλακες
-Σωληνάκια
-Τακάκια
-Υγρά Φρένων

Κιτ Φρένων
-Εξαπίστονα
-OEM Δαγκάνες
-Τετραπίστονα

Δίσκοι Φρένων
-Δίσκοι OEM
-Τρυπητοί
-Χαρακτοί

Τακάκια
-Αγωνιστικά
-Δρόμου
-Ενδιάμεσα

ExDisplay Parts

Information

-How to Order
-International Orders
-About Us
-Links
-Terms & Conditions
-Search
-Serres Circuit Calendar

Shopping Cart

Item

Qty

Price

Sub Total:	€0.00
Delivery:	€0.00
Total:	€0.00

View Cart
Checkout

Ανταλλακτικά-Πληροφορίες

ACT
AEM
APEXi
Autotech
B&M
Berga
Bilstein
Blitz
Bosch
BP
Brembo
Buddy Club
Clutch Masters
CTG Torqline
D2
Defi
Drag Wheels
DEI
EBC
Eibach
Energy Suspension
Exedy
Ferodo
Forge Motorsport
FSE
GAZ
Goodridge
H&R
HiSpec
HKS
Injen
K&N
K-Sport
Konii
Magnecor
Mann Filter
Meguiars
Mishimoto
Mongoose
Nardi
NGK Iridium
Pipercross
Powerflex
Quaife
Radtech
Raid hp
Roesch
Rota
Samco Sport
Seibon
SFS Performance
Skunk2
Spax
Supersprint
Tarox
TEIN
Tenzo-R
Valeo
Walbro
Whiteline
Wiecherss
Work Wheels
Yokohama

New Products / News

NEW STREET & CIRCUIT ONLINE SHOP
22.9.11: More links to new shop added
7.1.11: R888 Tyres, new prices for 2011
19.7.10: Greddy EVO X TI-C Racing Exhaust Systems now available
26.4.10: LUK and Sachs clutches now available, please call for price
23.2.10: Opel, Fiat, Toyota, BMW Pages Updated, EG Civic Part Page
31.12.09: Rays Wheels - Volk Racing & G-Games
28.12.09: New Wheel Pages - Audi A4 B5, A4 B6, A5/S5, TT MK1, TT MK2
18.12.09: New Wheel pages for MX5, Mazda 6, EK & EP3 Civic, Jazz, S2000, CRX
20.11.09: New Wheel Pages for Mazda 3, RX-8, VW Golf 5, Audi A3 Impreza GD, Mitsubishi EVO 7,8,99 & EVO X, Toyota Celica, Corolla, Honda Civic EG, Hyundai Coupe
12.11.09:
7.11.09: ProRace Group N Clutches
6.11.09: New Office Hours from Monday 9.11.09, 9am-5pm
5.11.09: Exedy Clutches, Forge Twintake Golf 5, Oil Catch Tank Kit Golf 5, Short Shifter VAG 5 Speed

Ανταλλακτικά ανα Αυτοο/το

Alfa
Aston Martin
Audi
Bentley
Bristol
BMW
Cadillac
Caterham
Chevrolett
Chrysler
Citroen
Daewoo
Daihatsu
DeTomaso
Dodge
Ferrari
Fiat
Ford
Holden
Honda
Hummer
Hyundai
Jaguar
Jeep
KIA
Lamborghini
Lancia
Land Rover
Lexus
Lotus
Marcos
Maserati
Mazdaa
Mercedes
Mini
Mitsubishi
Morgan
Nissan
Opel
Peugeot
Porsche
Renault
Saab
Seat
Skoda
smart
SsangYong
Subaru
Suzuki
Toyota
TVR
VW

Ανταλλακτικά-Πληροφορίες

OLD LINKS
AEM
APEXi
Autotech
B&MM
Bilstein
Blitz
Bosch
Brembo
Buddy Club
Clutch Masters
CTG Torqline
Defi
Drag Wheels
DEI
EBC
Eibach
Exedy
Ferodo
Forge Motorsport
FSE
GAZ
Goodridge
H&R
HiSpec
HKS
Injen
K&N
Koni
Magnecor
Mann Filterr
Meguiars
Mongoose
NGK Iridium
Pipercross
Powerflex
Quaife
Radtech
Raid hp
Samco Sport
Seibon
SFS Performance
Skunk2
Spax
Supersprint
Tarox
TEIN
Tenzo-R
Valeo
Wiechers
Work Wheels
Yokohama

New Street & Circuit Website - Κάντε Κλικ Εδώ!

Short Ram Intakes

AEM Short Ram intake systems are an economical alternative to our Cold Air systems and deliver performance, value and ease of installation over any other short inlet intake. Our Short Ram intakes install easily under the hood and cost less because we use less material to manufacture them.

During the development process, we found certain applications respond favorably to shorter inlet lengths over our longer Cold Air designs. For these applications (denoted in the search results page), we offer a Short Ram system only. We perform extensive temperature testing to locate the filter in the coolest area of the engine compartment, which allows our Short Ram systems to achieve the lowest inlet temperatures possible. Please refer to our temperature testing procedures for more information.

	Engineered to produce significant increases in power
	50-state legal or pending legality
	Manufactured and assembled in the USA
	AEM’s lifetime DRYFLOW Synthetic air filter is up to 99.52% efficient in FINE DUST testing, filters dirt as small as one micron, and never needs filter oil!
	Inlet constructed of lightweight 6063 aluminum and mandrel bent for maximum flow
	Reinforced TIG-welded brackets and fittings deliver added durability
	Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
	Comprehensive installation instructions, and decals included
	Available powdercoated in red or blue, or with a mirror-polished finish
	Guaranteed for life
	CLICK HERE to view the results of our DRYFLOW's Filter Efficiency Test w/fine dust between a new and cleaned filter.
	CLICK HERE to view the results of our DRYFLOW's Filter Efficiency Test w/coarse dust.
	We EXTREMELY abused one of our Synthetic DRYFLOW Air Filters with brake cleaner, window cleaner, industrial cleaner, bleach, Honda Brite, carb cleaner, weld prep and topped it off by blowing the filter out from the inside with 125psi directed air stream... Then sent it back for independent testing to see how efficient the filter would be. CLICK HERE to view the test results!
	For a cross reference chart to see which DRYFLOW filter fits your Short Ram System, CLICK HERE

Acura	BMW	Chevrolet
Chrysler	Dodge	Eagle
Ford	Honda	Hyundai
Lexus	Mazda	Mercury
Mitsubishi	Nissan	Pontiac
Saab	Saturn	Subaru
Toyota	Universal

FAQs - Short Ram Intakes

Q:	What is a C.A.R.B. E.O. number?
A:	AEM intake systems carry or are pending approval for a California Air Resources Board Executive Order (CARB EO) number, exempting them from the prohibitions of California Vehicle Code (CVC) 27156, which states that you cannot modify your car in the area of the emission control system. The C.A.R.B. E.O. number allows you to legally use the AEM intake system on your car.

Q:	What does the soft mount do and how important is it?
A:	The majority of AEM air intake system designs mount to a vehicle in two locations. One mounting location is to the engine at the throttle body and the “cold” or filter end of the inlet pipe mounts to the body of the car. The movement of the engine on the engine mounts allows it to rock inside the engine bay, so we compensate for engine motion by using a soft mount that provides a flexible link for the inlet pipe between the engine and the body of the car. If you do not install the soft mount properly the inlet tube may break at the bracket weld and void the warranty on the intake system. Our instructions provide a detailed diagram of proper installation of the soft mount, and are viewable from the search results page for each application.

Q:	I have an engine swap. Which intake should I use?
A:	AEM manufactures hybrid intake systems for Hondas and Acuras with a popular engine swaps. These intakes are a direct fit and fully warranted. For cars with other engine swaps, we do not recommend using our intake because of potential fitment problems. If you elect to purchase an AEM intake for your engine swap application, we cannot guarantee proper fitment and any modifications to the intake system will void the manufacturer warranty.

Q:	What is the warranty on my AEM intake?
A:	AEM warrants that its intake systems will last for the life of your vehicle. AEM will not honor this warranty due to mechanical damage (i.e. improper installation or fitment), damage from misuse, accidents or flying debris. AEM will not warrant its powdercoating if the finish has been cleaned with a hydrocarbon-based solvent. The powdercoating should only be cleaned with a mild soap and water solution. Proof of purchase of both the vehicle and AEM intake system is required for redemption of a warranty claim. This warranty is limited to the repair or replacement of the AEM part. In no event shall this warranty exceed the original purchase price of the AEM part nor shall AEM be responsible for special, incidental or consequential damages or cost incurred due to the failure of this product. Warranty claims to AEM must be transportation prepaid and accompanied with dated proof of purchase. This warranty applies only to the original purchaser of product and is non-transferable. Improper use or installation, use for racing, accident, abuse, unauthorized repairs or alterations voids this warranty. AEM disclaims any liability for consequential damages due to breach of any written or implied warranty on all products manufactured by AEM. Warranty returns will only be accepted by AEM when accompanied by a valid Return Merchandise Authorization (RMA) number. Credit for defective products will be issued pending inspection. Product must be received by AEM within 30 days of the date RMA is issued. If you have a warranty issue, please call (310) 484-2322, extension 203 and our customer service department will assist you. A proof of purchase is required for all AEM warranty claims.

Q:	Why does AEM use aluminum for its intake piping?
A:	Our Chief Engineer John Concialdi provides an explanation of the difference between Aluminum vs. Steel vs. Plastic in inlet piping: The issue of heat absorption with an intake system has a degree of validity, however we have found that too much emphasis is placed on material selection, instead of the real issue of tuning the system. Our systems feature a unique shape and diameter because this is what we found to make the most useable torque and horsepower for each individual application in testing. However, for the purposes of this discussion, we will limit it to why we choose to make our systems from aluminum and the effects of heat absorption on all materials. If you do not wish to review all of this information right now, a quick synopsis of this discussion is outlined in the following bullet points, with complete topic discussions below: We use aluminum to eliminate any chance of the system rusting, and it's lighter than steel We limit our use of plastic because this material absorbs some of the sound energy we work to create in the inlet duct Whether or not an inlet system is made from aluminum, steel or plastic, the thermal conductivity of the duct material has little effect on engine power The rate at which air travels through the inlet path under open throttle, when one is asking the engine for maximum power, negates the effect of material heat soak, regardless of the material We use aluminum—or a combination of aluminum and plastic plenums for throttle-body-injected applications that require a special plenum—for every intake we produce. This eliminates any chance of rust occurring on the inside of the inlet pipe. We have seen chrome-plated steel systems whose inner diameter became rusted over time, causing flakes of rust to travel along the inlet path. We also choose aluminum because of its lightweight properties. Heavier components place higher loads on the brackets they are attached to—or even worse, to the pipes they are attached to. We combine our lightweight aluminum design with a flexible coupling device we call a soft mount that connects the intake system to the body of the vehicle. In addition to the soft mount, we use doublers at the point where the mounting bracket is welded to the pipe for additional strength. We limit our use of plastic because this material absorbs some of the sound energy we work to create in the inlet duct. Although we use the best plastic material for our plenums, it is still not as resilient and does not retain the visual appeal of aluminum over long-term use. Because we have to use plastic on throttle body applications, we take extra precautions to ensure that the aluminum retaining ring that attaches to the throttle body is anchored securely into the plastic plenum; this is done by making an interlocking mechanical link between the plastic and aluminum. Whether or not an inlet system is made from aluminum, steel, or plastic, the thermal conductivity of the duct material has little effect on engine power. We have found that the tuning of the pipe, in addition to providing the coolest inlet air source, are the keys to making useable power. We perform engine inlet-air-temp studies when developing each application to determine the coolest location for sourcing inlet air. In addition to this, we determine the safest location for the inlet source to protect it from highly dusty conditions and water. To this end, we provide a stainless-steel heat shield to help minimize heat soak into the inlet area, as well as to provide protection from dust, dirt and mud. At light throttle opening, air speed and airflow at the inlet system are relatively low. The high residence time of air in the inlet while at low-throttle settings will increase inlet charge temps when materials with high thermal conductivity are used. Typically, when someone is at light throttle they are not asking the engine to make power. Most likely, fuel economy is the issue. When the throttle is fully opened however, air speed and airflow increase considerably. Typically, the inlet air speed of a 5.7L engine with a four-inch duct at full throttle is 34 feet-per-second, based on a volumetric efficiency of 70% and an engine speed of 3,000 rpm. Most inlet systems for every intake manufacturer for this engine are 30 inches or less. This means that the air in the duct of a 30-inch inlet length on this engine at the given rpm is 1/10th of a second—hardly enough time to transfer an appreciable amount of heat into the air stream on any system. Basically, the rate at which air travels through the inlet path under open throttle, when one is asking the engine for maximum power, negates the effect of material heat soak, regardless of the material. We hope that this helps to clear up the issues of material heat absorption in intake systems.

Q:	What’s the Difference between a Cold Air System (CAS) and a Short Ram (SRS)?
A:	In most cases a CAS will out perform a SRS throughout the useable power range. AEM emphasizes developing power in the lower to mid range of the power band, since this is the area of the power band typically used in daily driving. A CAS is typically longer and places the air filter outside of the engine bay to achieve ambient inlet air temperatures. A SRS places the air filter under the hood and uses a shorter inlet pipe than the CAS. In some cases, the SRS is preferred over the CAS due to inlet tract length tuning. The power advantage gained by using the correct diameter and length of tube negates the advantage of cooler inlet air in these cases. In these instances AEM only offers SRS in some cases because there was no advantage to using the CAS. These applications are noted in the search results.

Q:	Will an AEM intake void my new car warranty?
A:	NO. The only time this can happen is from improper installation that causes damage to a vehicle system. If a service technician denies your warranty claim ONLY because the car is modified with an AEM intake system and the vehicle system failure was not a direct result of the installation and use of an AEM intake, please refer him to the Magnusson Moss Warranty act. You can download the Magnusson Moss Warranty act from SEMA’s website at: http://www.semasan.com/main/main.aspx?id=60128.